Three-Party Residential HVAC Equipment and Installation Agreement (Utah)
Last updated November 5, 2026
This Agreement applies to a Install Direct order for a home in Utah after the site verification. It identifies separate legal responsibilities. Install Direct is responsible for its equipment sale, marketplace and disclosed payment collection duties. The licensed installation contractor is responsible for the physical installation and its legally required contracting duties. Calling a party a marketplace does not remove obligations imposed by Utah law.
1. The three parties
1.1 Customer. "Customer" means the customer and property named on your order.
1.2 Installer. "Installer" means the installer named on your order, a licensed installation contractor.
1.3 Install Direct. "Install Direct" means Install Direct, a Utah-launch HVAC equipment seller and technology marketplace, reachable at support@installdirect.pro. Mailing address: 7533 S CENTER VIEW CT STE R · WEST JORDAN, UT · 84084.
1.4 How each party is bound. Customer accepts this Agreement through the order's checkout, and approves later changes and completion through the order's change-order and sign-off steps. Installer and Install Direct are bound to the duties described here through their existing agreements with each other and through accepting the job. No party has signed a separate copy of this document. Each party is bound only by obligations allocated to that party and by generally applicable law. Customer purchases the equipment on the order from Install Direct under the incorporated purchase terms and engages Installer to perform the installation on the order.
1.5 No license borrowing. Installer independently holds and uses its own licenses and legally required qualified personnel. Install Direct does not acquire or use Installer's contractor license through this Agreement. None of the parties may act outside the scope of its lawful authority.
2. Agreement documents; final transaction
2.1 Incorporated documents. The following are part of this Agreement: (a) Exhibit A, the order's record of the final verified equipment, scope, price and exceptions; (b) Exhibit B, any approved change orders on the order; (c) Exhibit C, the order's completion and sign-off record, made only after the work is done; and (d) Install Direct's Terms of Service, Payment Terms and Refund Policy (the "Purchase Terms").
2.2 One final price. Customer's order shows one final total price: the final total shown on your order. Customer shall not be charged twice for any portion of the project. If financial information conflicts, the parties shall reconcile it and obtain Customer's written approval before work begins.
2.3 Relation to prior sale. Any initial quote or dealer-assisted checkout remains subject to a completed site survey, final documented approval and applicable cancellation rights. No dealer, appointment setter or salesperson may override the final approved terms with unauthorized promises. Nothing here excuses misleading statements made during sales.
2.4 No waiver of independent liability. The allocation of duties in this Agreement does not waive nonwaivable claims against any party, eliminate any legally required license, or limit obligations a party independently assumed elsewhere.
3. Site survey and final approval
3.1 Timing. Installer completes a site survey at the home before any regulated installation work begins, and reviews the equipment selection, property conditions, installation scope, expected labor and required trades. The date is kept in the order's record.
3.2 Verification subjects. The survey reasonably addresses equipment model and matched system; available space and access; indoor and outdoor locations for each system; ductwork, airflow and sizing information reasonably available; electrical and fuel supply; combustion and venting; refrigerant piping; condensate drainage; existing equipment; permits; and structural and safety concerns.
3.3 Technical suitability. Installer will not knowingly install incompatible or unsafe equipment. Installer shall promptly notify both Customer and Install Direct of material errors in specifications or observable work conditions. Install Direct will coordinate product changes and any price changes approved by Customer.
3.4 Known exclusions. Known deficiencies and excluded work belong in the order's record. Hidden conditions discovered later are handled under Section 7; matters a competent site review should have disclosed are not automatically extras.
4. Install Direct equipment sale and platform duties
4.1 Equipment sale. Install Direct is responsible for selling or arranging the lawful sale of the equipment on the order to Customer under the Purchase Terms, including accurate equipment descriptions, documented substitutions, and performance of its own express seller warranties and refund obligations.
4.2 Procurement channel. Install Direct may obtain equipment through an authorized purchasing partner. If that purchasing partner, or Installer, buys the equipment, that does not change who is responsible under this Agreement.
4.3 Equipment ordering. Install Direct orders the equipment once the order is paid, and makes it available for the agreed installation within commercially reasonable times, subject to documented supplier delays, law and Customer-approved changes. Installer shall inspect the delivered equipment for visible shortages, damage and apparent model mismatches before installation.
4.4 Equipment title and delivery. Title to goods, allocation of shipping risk, returns and equipment refunds follow the Purchase Terms and applicable law. No party may substitute an unapproved or materially inferior model. Any disagreement about delivery condition shall be promptly documented.
4.5 Platform coordination. Install Direct may provide quoting software, electronic records, communications, scheduling assistance, payment technology and customer-support administration. Installer retains technical control, supervision and statutory duties for regulated installation work.
4.6 Customer data. Each party shall use customer information only for transaction fulfillment, warranty support and the uses described in Install Direct's Privacy Policy, and shall protect it using reasonable safeguards and applicable privacy law. No party may sell customer information or use it for marketing.
5. Installer scope; permits; quality
5.1 Direct work obligation. Customer hires Installer, and Installer agrees to perform and complete the installation on the order for the final total price, which Customer pays to Install Direct under Section 6. Work typically includes removal or disconnection and lawful disposal of replaced equipment where included; setting new equipment; approved mechanical, fuel, electrical, refrigerant, venting and drain connections within scope; start-up; basic commissioning and safety checks; cleanup; and completion records.
5.2 Permits and inspections. Installer is responsible for determining, obtaining and maintaining required permits and arranging required inspections for its work. Routine permit expenses are included in the final total price unless the order's record expressly and lawfully provides otherwise. Installer shall correct its own code or workmanship failures without charging Customer again.
5.3 Code and manufacturer standards. Installer shall follow applicable Utah and local codes, manufacturer instructions, refrigerant and environmental rules and safe work practices. Work requiring separate trade licensure shall be performed by appropriately qualified persons.
5.4 Responsibility for personnel. Installer controls its means, methods, staffing, employees and approved subcontractors and is responsible for their acts and omissions as law provides. No unauthorized assignment or substitution of a different installing business is permitted.
5.5 Damage and cleanup. Installer shall protect the residence against reasonably avoidable damage, promptly remediate damage arising from its negligence or breach, and leave the immediate work area reasonably clean.
5.6 Work not included. Major structural work, hazardous-material remediation, major duct replacement, main electrical-panel upgrades and unrelated preexisting system repairs are excluded only when stated in the order's record or approved later by change order. Installer may not omit legally necessary safety work while representing the installation as complete.
6. Price, customer payment and collection
6.1 Final price. The final total price is the final total shown on your order, including taxes and approved extras. No increase is effective without Customer's written approval under Section 7.
6.2 When Customer pays. After Installer's site verification is approved, Install Direct issues Customer's final bill. Customer may pay it, or apply for financing, with the site verifier on the verifier's device, or later from a link sent by text and email. Paying on the device is Customer's choice. Customer pays by card or from a bank account; card numbers go directly to Install Direct's payment processor, Stripe. Financing is offered through Hearth; Hearth's application is on Hearth's own site and approval is decided by its lenders. A Hearth loan is a personal loan: if Customer is approved and accepts an offer, the money goes to Customer's own bank account, not to Install Direct. Customer then pays the bill from the link by card or bank account. The order is not paid, and the equipment is not ordered, until Customer does. Customer's details are not kept on the verifier's device. Nothing is charged until Customer pays the bill, and a saved card is charged only when Customer taps Pay. Under the standard program, Customer pays before the equipment is ordered and before installation. Any exception requires a separately lawful, specific authorization and applicable disclosures.
6.3 Who is paid. Customer pays Install Direct the one final total price. Install Direct pays Installer an installation fee from that total under their separate agreement, after Customer's completion sign-off. Customer's payment to Install Direct discharges Customer's payment obligation to Installer for the approved work, subject to actual reversal or invalid payment. Customer owes Installer nothing further for that work, and Installer must seek any later undisputed amount from Install Direct rather than billing Customer.
6.4 No off-platform charge. Installer will not demand cash, separate direct payment, undisclosed extras, or any duplicate payment from Customer. A dealer or third party may not independently charge Customer for this project.
6.5 Disputed completion. Customer may withhold completion sign-off for reasonable identified deficiencies, and may describe them to Installer or Install Direct using the contact details in this Agreement. Installer must investigate and cure verified defects. Any undisputed or partially completed amount, and any refund or holdback, is determined by written agreement, the Refund Policy and applicable law. Customer cannot be required to certify work that is incomplete or defective.
6.6 Payment processing. Install Direct is responsible for obtaining valid payment instructions, processing authorized charges, furnishing appropriate receipts, handling platform payment issues and maintaining lawful payment security.
6.7 No hidden charges. Dealer commissions and Installer's installation fee are commercial arrangements between the relevant businesses. They create no charge to Customer beyond the final total price.
7. Change orders and unforeseen conditions
7.1 Written approval. Material changes to equipment, installation scope, agreed prices or timeline require a change order on the order. Installer proposes it through the platform, Install Direct reviews it where the platform requires, and Customer accepts it, before chargeable work proceeds.
7.2 Concealed conditions. Installer shall halt affected work when necessary, document concealed conditions, provide a specific description and proposed cost or schedule adjustment, and obtain required approvals. Emergency measures reasonably necessary to prevent imminent injury or damage may be taken consistent with law, but do not authorize unrelated extras.
7.3 Pricing adjustments. Equipment or labor increases are not automatically Customer obligations. If a proposed necessary change is rejected, the parties shall discuss safe scope revision or lawful cancellation and accounting consistent with the Purchase Terms and consumer rights.
7.4 Change log. Install Direct shall retain approved changes in the order's record, available to Customer and Installer.
8. Scheduling; access; performance
8.1 Schedule. Installation dates are kept on the order. Installer shall diligently perform and promptly report delays, including weather, equipment shortages, approved changes or required inspections.
8.2 Property access. Customer will provide reasonable access, make known hazards and site restrictions reasonably available, and keep pets and others away from work zones. Customer is not required to supervise skilled work.
8.3 Material delays. Installer or Install Direct, as appropriate, shall communicate revised delivery or work dates promptly. A reasonable opportunity to cure shall be provided for ordinary scheduling defaults without waiving statutory cancellation rights.
8.4 Safety. Installer may stop unsafe work and shall notify Customer and Install Direct promptly; no party may require installation in violation of law or manufacturer requirements.
9. Warranties; defects and manufacturer assistance
9.1 Workmanship warranty. Installer provides a written workmanship warranty for the term shown on your order, which is at least 2 years from substantial completion, or such longer period as law requires. Its scope shall match warranty representations provided to Customer before the work was accepted. Installer shall correct verified workmanship defects without additional labor charge during coverage.
9.2 Equipment warranty. Install Direct shall provide available manufacturer warranty documentation and the details of any separate express equipment seller warranty. Manufacturer warranty claims are subject to actual warranty terms. Installer shall provide model and serial and start-up records and reasonably assist with manufacturer claims.
9.3 Exclusions. Reasonable workmanship exclusions may include damage solely caused by misuse, unrelated preexisting conditions, unauthorized modifications or external casualty, but not Installer negligence, improper installation, or nonwaivable rights.
9.4 Reporting and response. Customer may report defects to either Installer or Install Direct. Both shall promptly route the concern to the responsible party. Safety-related claims shall receive priority. Installer's warranty does not end if its marketplace account is deactivated.
9.5 Rights preserved. No final sign-off or warranty description eliminates rights for latent defects, deceptive sales practices, or statutory remedies.
10. Completion and customer sign-off
10.1 Completion checklist. Installer shall submit evidence of installation, startup and reasonable performance testing; equipment model and serial numbers; photographs where required; permit and inspection status; cleanup; user operating guidance; and outstanding items.
10.2 Actual acceptance. Customer is offered completion sign-off only after completion and a reasonable opportunity to inspect. Customer signs off in person or from a link. If the work is not complete or not right, Customer does not sign, and tells Installer or Install Direct what is outstanding. Sign-off shall never be pre-checked, fabricated or used to waive unseen defects.
10.3 Inspection pending. If an official inspection is pending, Installer must identify what remains pending and arrange its completion. It shall not falsely represent that an inspection has passed.
10.4 Payment timing. Customer pays under Section 6.2, before installation under the standard program. Sign-off confirms completion; it does not trigger a charge to Customer. Disputed amounts are addressed under Section 6.5 and applicable law.
11. Cancellation and dealer-generated sales
11.1 Prior sale controls required disclosures. When a Install Direct dealer, door-knocking company or other representative solicits a qualifying sale in the home, all required cancellation notices and duplicate forms must be delivered at the time of that original sale and in the legally required language. This later post-survey agreement is not a substitute for those original notices.
11.2 Nonwaiver. Customer retains all applicable rights under the FTC Cooling-Off Rule, applicable Utah home-solicitation statutes and Utah consumer protection law. No provision attempts to waive mandatory cancellation rights.
11.3 During an active right. No party shall commence work, order nonreturnable equipment, or collect a prohibited charge during an applicable cancellation period in a manner that defeats Customer's rights. Emergency exceptions apply only if all legal conditions are met.
11.4 Other cancellations. If a lawful cancellation occurs after costs have been incurred, any charge, return, restocking expense or refund shall be determined under applicable law and the Purchase Terms; no blanket nonrefundable penalty is created by this Agreement.
11.5 Contact. Install Direct can be reached at support@installdirect.pro. Mailing address: 7533 S CENTER VIEW CT STE R · WEST JORDAN, UT · 84084. Any cancellation addressed to Install Direct under the Purchase Terms shall be handled promptly.
12. Utah homeowner lien protection notice
PROTECTION AGAINST LIENS AND CIVIL ACTION. Notice is provided under Utah Code Section 38-11-108: under Utah law an owner may be protected against liens on an owner-occupied residence and certain civil actions to recover amounts owed for qualified services furnished by suppliers and subcontractors when either: (1) the owner has a written agreement with an original contractor or other qualifying contracting entity that was properly licensed or exempt when the agreement was signed, and the owner pays that entity in full under the agreement and modifications; or (2) the general contract totals no more than $5,000. An eligible owner may apply to the Utah Division of Professional Licensing for a Certificate of Compliance. Information and applications: www.dopl.utah.gov/rlrf.
This notice summarizes potential statutory protection; eligibility depends on the law and project facts. If a mandatory form of notice is prescribed at the time of execution, that current prescribed notice must be supplied with this contract. Customer should keep evidence of payment and all approved change orders.
13. Insurance, liability and disputes
13.1 Insurance. Installer represents that it maintains legally required workers' compensation, liability insurance and any bonding mandated for its license and work. Install Direct shall verify eligibility through its network procedures.
13.2 Responsibility. Each party is responsible for its own wrongful acts, negligence, fraud and legally imposed obligations. Installer is responsible for its installation work and persons under its supervision; Install Direct is responsible for its equipment sale and platform and payment duties. No provision purports to bar Customer claims against a party whose actions caused harm.
13.3 Good-faith resolution. The parties shall try to resolve ordinary disputes promptly using written defect notices and available platform records. Install Direct may assist in coordinating resolution, but is not made the technical arbiter of code or workmanship disputes.
13.4 Law and venue. Utah law governs, subject to mandatory consumer protections. Courts of competent jurisdiction and proper venue may hear disputes; no mandatory arbitration, jury waiver or class-action waiver is imposed by this Agreement.
13.5 Written notices. Notices may be delivered to the contact details in Section 1 and on the order, subject to any different method mandatory law prescribes. The order's records stay available to Customer electronically.
14. Default; termination; general terms
14.1 Breach and correction. Material breach includes unauthorized charges, abandonment, substantial failure to perform, serious safety or licensing violations, misrepresentation, or nonpayment when lawfully due. Affected parties shall provide reasonable notice and opportunity to cure when circumstances allow; urgent safety or statutory remedies are not delayed.
14.2 Safe transition. If Installer cannot complete the work, the parties shall cooperate in safely securing the site, documenting completed work and lawfully transitioning to another properly licensed contractor with Customer authorization as required. Reassignment does not retroactively erase liabilities.
14.3 Final accounting. A lawful cancellation or termination requires accurate records of equipment delivered, work performed, charges, refunds and undisputed sums, with no duplicate charges or unlawful forfeitures.
14.4 Entire agreement. For the final installation project, this Agreement and its exhibits establish Customer's and Installer's work obligations and Install Direct's limited responsibilities set forth here. The Purchase Terms govern Install Direct's actual equipment-sale and payment obligations. Conflicting prices, dates or equipment specifications must be reconciled and approved before work starts.
14.5 Amendments and electronic acceptance. Material modifications require a written or authenticated electronic change accepted by the affected parties through the order's change-order step or their existing agreements. Electronic acceptance and electronic signatures are valid to the extent permitted by law. Invalid provisions are severed to the extent necessary without defeating mandatory consumer protections.
Exhibit A: final verified scope and price
Exhibit A is the order's record, not a separate form. It holds the project and order number; the customer and service address; the site survey date and person; Installer's name and the license details on file; existing equipment and observed conditions; for each system, the indoor and outdoor locations, the new units' manufacturer and model, capacity, efficiency and matching reference, furnace details where they apply, controls and accessories, and included work; disclosed exclusions; the installation date; the workmanship warranty term; and the one final total price, the final total shown on your order.
Exhibit B: change orders
Exhibit B is the order's record of each change order: the reason for the change or site condition; what equipment or services are added or removed; the original total; the net change; the revised total; any schedule, warranty or inspection effect; and Customer's acceptance. Accepting a change order authorizes only the changes recorded in it, and no separate or undisclosed payment.
Exhibit C: completion and sign-off
Exhibit C is the order's completion record, made only after installation and never accepted in advance. It holds the completion date, the installing company, equipment model and serial numbers, the installation photos and checklist, and Customer's sign-off.
Customer acceptance does not waive latent defects, manufacturer warranties, workmanship warranties or nonwaivable statutory protections. A pending required inspection must not be falsely represented as passed.
Exhibit D: record of the sale and disclosures
This is an administrative record for customer protection. This post-survey agreement does NOT substitute for notices required at the time of the original dealer-assisted sale. Install Direct's record for the order covers: acceptance of the Purchase Terms at checkout; the source of the sale; any cancellation disclosures given at the original sale; Installer's license and insurance status at activation; the final site survey and equipment locations; the final total price on the order; and electronic access to these records.